Technical data

B) Pump Fed Cleaning Machine
Disassemble the mix pump assembly as pictured
below When disassembling the orings from the other
Proceed with the disassembly
ofthe mix injection
components, use only the oring removal tool provided
pump located in the mix storage tank First slide the
in the spare pats to01 kit. Using other tools to remove
connecting tube forward away from the mix pump
the orings from their grooves can result in damaging
faceplate This should
free the feeding elbow assembly
both the oting and component
from the pump assembly Pull the feed elbow assembly
straight up and out of the mix storage tank
Next remove the mix pump assembly by rotating
clockwise until the hook stud on the rear of the pump
disengages from the pump hub. After disengaging,
slide the pump away from the rear of the machine and
out of the mix storage tank