Technical data

Part 111-Initial Cleaning Procedure

IMPORTANT

Before starting this procedure, place the machine

the STOP mode on the touch pad

This is a new machine and although clean, it must be

completely disassembled, washed and sanitized

before adding fiesh product Please proceed as

follows:

Remove the mix tank cover and spare parts items

packed inside the mix tank The spare parts kit will

include: spatula, cleaning brushes, sanitary

lubricant, or ing removal tool, sanitizer packets,

spare orings and seals, and operation manual Place

these items in a convenient place for

future

reference

HelpflSuggestion:

Before proceeding with the

disassembly of the freezer, we recommend the use of

a clean plastic pan or pail to place the removed parts

into This will minimize the possibility of misplacing

or damaging these components

Gravity Fed Cleaning Procedure

Proceed with the disassembly process by removing

the gravity feed tube, which is located inside the mix

storage tank. The tube should be pulled straight up

and out of'the tank

Next remove the outer regulating sleeve

from the center

tube by pulling straight off.

Finally remove the orings on the end

ofthe center tube

using

ONLY

the oring removal tool included in your

spare parts kit

WARNING

Never use anything other than the oring remover

provided in your tool kit Removing the orings with

other objects or tools can possibly damage the orings

and plastic parts

Once removed, the gravity feed tube must be

disassembled To disassemble, first remove the

splash guard from the center of the tube