Installation Guide
Table Of Contents
- Introduction
- Product Information
- Tools Required for Heater Installation
- Electrical Information
- Floor Preparation
- Planning Heater Layout
- Pre-Heater Installation
- Heater Installation
- Multiple Heater Installation
- Placing Heater Around Floor Obstacles (e.g. Floor Waste)
- Laying Floor Covering over Coldbuster Floor Heating:
- Thermostat Fit off & Connection to Mains Power
- Damage and Repair
- Safety & Operating Instructions
- Economy Tips
- Warranty
2
INTRODUCTION 3
Installation Dos and Do Nots 3
PRODUCT INFORMATION 4
TOOLS REQUIRED FOR HEATER INSTALLATION 4
ELECTRICAL INFORMATION 5
Electrical Preparation 5
Residual Current Device (RCD) 5
Hardwire Connection 5
Plug-In Connections 5
Floor Sensor Preparation (typically provided with your thermostat) 5
FLOOR PREPARATION 6
Concrete Subfloor Preparation 6
Timber Subfloor Preparation 6
Prepping Subfloor Surface with a Bonding Liquid (If heater(s) don’t stick due to dusty floor surface) 6
PRE-HEATER INSTALLATION 8
PLANNING HEATER LAYOUT 7
HEATER INSTALLATION 9
MULTIPLE HEATER INSTALLATION 10
PLACING HEATER AROUND FLOOR OBSTACLES (E.G. FLOOR WASTE) 11
LAYING FLOOR COVERING OVER COLDBUSTER FLOOR HEATING: 12
THERMOSTAT FIT OFF & CONNECTION TO MAINS POWER 12
DAMAGE AND REPAIR 13
SAFETY & OPERATING INSTRUCTIONS 14
ECONOMY TIPS 14
WARRANTY 15
Contents