Specifications

COLASIT AG
Plastic construction
CH-3700 Spiez
Phone [phone] Fax [phone]
Edition 2011 / Subject to alteration
Copyright by COLASIT AG Spiez
Page 13
After replacing a V-belt, check the tension after 1 to 4 hours of operation and retension as necessary.
The fan bearings are maintenance-free.
The bearing temperature of 70ºC may not be exceeded. In cases of high stress (environment) the grease
quantity loses its lubricity over time due to mechanical stresses, ageing and increasing contamination. This
issue can reduce the service life of the bearings.
Components which are not intended for repair by the operator must be sent to the manufacturer or agent for
repair or replacement (e.g. damaged impeller).
Your agent or COLASIT
also offers customer services
COLASIT AG
P.O. 85
CH 3700 Spiez / Switzerland
Tel.: [phone]
Fax.: [phone]
Manufacturer
e-mail [e-mail]
Agent see front page
Deposits on the impeller and soiling lead to imbalance and as a result to
vibrations with undesirable side effects.
If vibration occurs, switch the fan off immediately
Contamination and encrustations should be removed with a soft tool without damaging the surface (e.g. with
a wooden spatula or scraper).If possible, use water and a household cleaning agent
Solvents can corrode the material. These may only be used with the written
consent of COLASIT.
To carry out cleaning work, we recommend the production of a process instruction
8 Spare parts
Please identify components by means of the position and drawing numbers as well as the order number and
type designation.
Use only original spare parts. Our warranty becomes null and void if other or unapproved components are
used.
Please address your spare parts order to our customer service department.
9 Operating instructions
To operate the fan, we recommend the production of process instructions. These documents are intended to
simplify repetitive workflows, reduce the risk of incorrect operation and are a valuable aid for training and
when personnel changes occur.
If the fan must be qualified, process instructions are an absolute prerequisite.
You will find important instructions on how to produce process instructions in various chapters of this
operating manual.
To help ensure the safe operation of the fan, COLASIT offers the service of
reviewing process instructions prepared by the operator