Specifications
COLASIT AG
Plastic construction
CH-3700 Spiez
Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61
Edition 2011 / Subject to alteration
Copyright by COLASIT AG Spiez
Page 20
5. Fasten impeller with clamp adapter set on motor shaft
(Do not tight yet the clamp adapter)
6. Fasten inlet section on the casing
7. Adjust impeller, tighten clamp adapter set
Mount hub cap. Mount V-belt protection
Dismantling in the same way but in reverse order