Specifications
COLASIT AG
Plastic construction
CH-3700 Spiez
Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61
Edition 2011 / Subject to alteration
Copyright by COLASIT AG Spiez
Page 18
17 Assembly instructions
17.1 Assembly instructions CMVeco 125 – 400 with direct drive
1. Attach motor to the support
2. Attach casing to the support
3. Fasten impeller with the clamp adapter set on motor shaft
(do not tight yet the clamp adapter)
4. Fasten inlet section on the casing
5. Adjust impeller, tighten clamp adapter set.
Mount hub cap
Dismantling in the same way but in reverse order