Specifications

APPENDIX A
PLC CONTROLLER
A - 4
programmed after the current job, the controller will stop and return to the Job Entry
screen.
Clear Jobs
To clear the current job on the screen press Clear Job. To clear all the jobs in the
controller, press Clear All. The next screen will confirm the Clear All command, press
Yes to clear all jobs.
Auto Run
Press the Run Mode button to run the jobs that are programmed. Type in the job number
to run first (if different than the job that was just programmed).
Figure 89: Specify Job to Run First
Then hit Enter to continue to the Auto-Run mode.
Figure 90: Auto-Run Screen