User manual

After entering the IP address into the browser, the camera's View Images page will appear and
look similar to the following:
The camera's home page allows viewing live images, accessing still images, and navigating to
the browser-based configuration pages.
1.5 Configuration Basics
Once the camera is properly installed, several features can be customized, including image
settings, security features, and networking capabilities. While some of the camera's features will
need to be customized only for particular situations, other features will need to be configured for
all installations. These important features can be configured using the browser-based
configuration page and are discussed in the following places in this manual:
 Clock, see the Set Date section in Section 2.4.4
 Login and privileged passwords, see Management Passwords in Section 5.2.2
 The network gateway, see TCP/IP Gateway section in Section 2.4.4
 Image lighting, see Lighting in Section 3.3
Use the camera's browser-based configuration pages to adjust the features mentioned above.
1.5.1 Browser-Based Settings Pages
The 7100 Series camera include browser-based settings pages for configuring most settings. The
pull-down menus and text input fields on these pages allow performance optimization of the
camera. When using the pull-down menus, settings will activate when a setting is selected. For
the text input areas, settings will activate when <Tab> is pressed.
9 of 60