User manual

7.2.1 Drawing Windows
To draw a motion detection window:
1. Use the selected window pop-up menu to select an empty window position (see next section).
2. Position the cursor where you would like the upper left corner of the window to be, then click
the mouse button.
3. Position the cursor where you would like the lower right corner of the window to be, then
click the mouse button. You will see a rectangular area with white corner handles representing
this new active window.
4. If desired, adjust the window. There are two methods of adjustment:
 Click on the window frame and drag to move it without changing its size. The active
frame will be red, but you can move any frame by clicking on it.

 Click on any of the white corner handles to adjust the height and width. In the figure
below, the white handles have been moved so that the window is wider and aligned
closer to the left side of the screen. The camera will re-draw the window and update
the image display.
7.2.2 Creating Windows Manually
To manually configure a motion detection window, enter the appropriate values for all of the
following settings.
selected window Chooses which of the 8 available windows to activate for
configuration. Any changes you make to other motion detection
settings will apply to the window number that is selected here.
name Sets the name of the window. This is simply a label for reference
purposes and does not affect the camera operation.
left top Sets the top and left coordinates of the window. If you drew the
window with the mouse, these numbers will be filled in
automatically.
dimensions Sets the width and height of the window. If you drew the window
with the mouse, these numbers will be filled in automatically.
46 of 60