User manual

trigger now Click this link to initiate an immediate trigger event to test your
trigger settings.
restore trigger Use this link to restore all trigger settings (general, FTP,
defaults and e-mail) to their factory default configurations.
6.2.2 E-mail Settings
After a trigger event, the camera can send an e-mail to a remote user containing the images from
the event. Use the e-mail settings to enable the e-mail feature and specify all of the information
necessary for the camera to send e-mails to any valid Internet address.
Note: Some email servers are configured to filter messages based on To or From
addresses, subject lines, or other message parameters. Consult your system
administrator if you have problems sending messages from your camera.
domain name Enter the default domain suffix for your camera, such as cohu.com.
This setting must be properly configured to ensure that the e-mail
function will operate correctly.
primary Define the IP address of the nameserver on the camera's network.
nameserver
Note: Before the camera can use a text-based name for connection attempts, you must
specify a nameserver.
mailserver Defines the name or IP address of the SMTP (Simple Mail
Transfer Protocol) server on the camera's network.
from Define the e-mail address from which e-mails will be sent. Users
will see this address in the “from” field of the message.
subject Configure the title of the e-mail message. Users will see this text in
the subject field of the message. An example using dynamic print
variables would be "Message from $SN@$SM" - this would
automatically place the camera s name ($SN) and domain name
($SM) in the subject line of the message. For a complete
description of all dynamic print variables, see the Reference
Manual.
recipient Set the user(s) who will receive an e-mail from the camera after
each trigger event. Enter multiple e-mail addresses separated by
commas.
41 of 60