User manual

3.5 Focus
If the camera is out of focus, the rapidly updating image on the Focusing Aid page can be used to
help focus the camera. The image that appears on the Focusing Aid page is a rapidly updating,
reduced image from the center of your camera s field of view. To access the Focusing Aid page,
either select Focusing Aid from the navigational pull-down menu located on the View Images
page, or click the Focus tab that appears in the settings menu. After the selection is made, the
Focus page appears.
The web page should look similar to the following:
The image on the Focus page also displays a number that corresponds to the level of focus.
Maximize this number to properly focus the camera. The focus page also includes a slide bar, to
give a rough graphical scale to compare focus levels.
To focus the camera, slowly rotate the focus ring while watching the updating image. Since the
contents of the image and the lighting factor into the focus algorithm, make sure to not move the
camera or block the light when adjusting the focus.
The built-in Focus Utility may also be used to help adjust focus. This method uses either the
camera's LEDs or a console window to help focus the camera. Refer to the Focus Utilities
appendix for information on using the Focus Utility.
29 of 60