User manual

3.4.2 Exposure Tool
The exposure window is an area within the image that determines the brightness level for the
entire image. When the window is set, the brightness of the rest of the image adjusts to match the
brightness of the image in the window.
To set the window area:
1. Click the Exposure button.
2. Click the part of the image for the upper-left corner of the gain window.
3. Move the mouse to the area to be the lower-right corner of the gain window.
4. Click the mouse again to apply the changes to your camera s image.
To remove a previously configured gain window, click the Clear button.
3.4.3 Privacy Window
A privacy window is an area of the image that will be blacked out when viewers access the
camera. Up to 8 windows can be configured. These can be used to cover sensitive content in the
images, while still allowing users to see the overall picture.
To create a new privacy window:
1. Select "NEW" from the pull-down list next to the "privacy" heading.
2. Click the part of the image for the upper-left corner of the privacy window.
3. Move the mouse to the area to be the lower-right corner of the privacy window.
4. Click the mouse again to apply the changes to the camera's image. This may take a few
seconds.
When users view the camera's image, there should be a blacked-out area where the privacy
window was placed.
28 of 60