User manual

The default username = root The default password = system
Note: This information only needs entered once per session. The session will end either when
Logout is pressed or after exiting the browser.
Important: Optimize the security of the camera by changing the default passwords.
Refer to Access Control in Section 5.
3.3 Image Settings
Use the Image Settings page to fine tune the image displayed by the camera. The position of the
date/time stamp and custom user message can be adjusted, compensate for lighting and subject,
specify compression and flip or rotate the image.
On this page, the pull-down menus and text input fields are used to adjust several of the
camera's image settings.
24 of 60