User manual

2.5.2 View Still Images
To view still images, click the stop button that appears at the top of the View Images page.
Once the stop button is clicked, the camera will take an image and then display it in a new
browser page. Since the browser is requesting a new still image from the camera, the new image
will most likely differ from the last streaming image.
2.5.3 Save Images (optional)
Images on the Still Image page are saved by using the same method used to save any image from
the World Wide Web. The still images will be in JPEG file format. Since techniques for saving
images from the WWW vary according to the type of browser, the following steps outline the
process used by most browsers.
1. Access the camera's Still Image page
2. Right-click the image (MacOS users click and hold over the image)
3. Click on Save this image as
4. Choose the folder in which to save the image
5. Rename the image, if desired
6. Click the Save button.
Note: Once the Save button is clicked, the browser will request a new still image from the
camera. Because of browser functionality, the saved image will not be identical to the one
previously displayed.
22 of 60