User`s manual

Chapter 4: Using the Administrator Tool

Connect to the Printer

Select the connection method being used between computer and printer.

• Ifusingserial,selecttheappropriatecommunicationportandbaudrate.The

C Series default serial baud rate is 9600.

• IfusingUSB,selecttheappropriateprinterdriver.

NOTE: REFER TO CHAPTER 3: SOFTWARE INSTALLATION FOR MORE DETAILS

• IfusingNetwork,selectthecorrectIPaddress.

NOTE: REFER TO CHAPTER 6: NETWORK PRINTING AND CHAPTER 2: CONNECTING

DATA CABLES TO THE PRINTER FOR MORE DETAILS

Once connected, the software will display the connection method in green with a

“Connected” message as shown below. On the right side of the window, the printer’s

settings will be displayed.

Next, print a self test label by selecting the “Print Self-Test Label” button located in the

lower right of the window. This will verify connection to the printer.