User`s guide

Follow These Steps to Set Up the C Series Printer:

1 2 3

To Get Started:

Helpful Web Links and Contact Information:

Please refer to the User’s Guide on the CognitiveTPG Website

for full details on setting up and using the C Series printer.

Internet Users

Go online to: http://www.CognitiveTPG.com and register your

C-Series printer under “Warranty Registration.” Access and

download the latest utility, drivers, and documentation.

Non-Internet Users

Call 800-732-8950, ext. 2474, to request a set-up CD-ROM.

To learn more about CognitiveTPG approved media, please check out our new Online Media Selection Tool.

For C Series technical support, please contact your local reseller or CognitiveTPG toll free at 800-732-8950, option 4,

direct at 607-274-2500, option 4, or email support@CognitiveTPG.com.

Unpack the Printer:

Remove the following contents from the Box:

1. The C Series Printer

2. Power Supply Kit including

 •PowerCord

 •PowerSupply

3. The Accessory Box including

 •Spindle

 •USBCable

 •SampleMediaKit

 •Documentation

Connecting Power to the C Series Printer

Plug power supply to power source and a green LED will illuminate on the power supply.

NOTE: Do NOT power the printer on until instructed.

Printer Power Test:

1. Press the Power Connector (D) to the ON position.

NOTE: Power Light (A) on top user interface cover will

turn green to indicate unit is receiving power. Ready

Light (B) will rst turn red, then auburn, then green

once printer is ready to print.

Cxi Printers Only: LCD display will briey state Press

Right Arrow for Menu for about 1 second. Then

display will read Cognitive Cxi for about 1 second.

Once printer is ready to print, display will read

COGNITIVE (see Cxi Only image left).

2. Press Power Switch (D) to OFF before proceeding to

next steps.

CXi Only