Owner manual

Example:

! 0 0 0 0

VARIABLE READ

VARIABLE ETHERNET IP 130.10.1.6

VARIABLE WRITE

VARIABLE ETHERNET RESET

END

LPD

Function:The VARIABLEETHERNETLPD command toggles LPDon and off.

Command Form:VARIABLEETHERNET LPD status

Parameters:ON / OFF (default is ON)

Example:

! 0 0 0 0

VARIABLE READ

VARIABLE ETHERNET LPD ON

VARIABLE WRITE

VARIABLE ETHERNET RESET

END

NETMASK

Function:The VARIABLEETHERNETNETMASK command establishes the

Netmask value.

Command Form:VARIABLEETHERNET NETMASK X.X.X.X

Parameters:X.X.X.X, where X is a value between 0 and 255 (default is 0.0.0.0)

Example:

! 0 0 0 0

VARIABLE READ

VARIABLE ETHERNET NETMASK 255.255.0.0

VARIABLE WRITE

VARIABLE ETHERNET RESET

END

Variable Ethernet Commands