Owner manual

BOOTP
Function:The VARIABLEETHERNETBOOTP command toggles BOOTPon and
off.
Command Form:VARIABLEETHERNET BOOTP status
Parameters:ON / OFF (default is ON)
Example:
! 0 0 0 0
VARIABLE READ
VARIABLE ETHERNET BOOTP ON
VARIABLE WRITE
VARIABLE ETHERNET RESET
END
FIRMWARE
Function:Used in conjunction with BOOTP, the VARIABLEETHERNET
FIRMWARE command automatically updates the printer firmware.
Command Form:VARIABLE ETHERNETFIRMWARE p r f s
Parameters:p: specifies the part number of the installed firmware,
r: specifies the firmware revision,
f: specifies the filename and directory path where the firmware is locat-
ed,
s: specifies the server IP address where the firmware is located
Comments: Firmware part numbers and version numbers may change.
Check with your Cognitive representative or
www.cognitive.com/firmware for current information.
Example:
! 0 0 0 0
VARIABLE READ
VARIABLE ETHERNET FIRMWARE 195-113-217 V2.17
/tftpboot/195113.217 130.10.103.106
VARIABLE WRITE
VARIABLE ETHERNET RESET
END
Note:Additional information on BOOTPfirmware updates is located in the
BOOTPConfiguration Guide.
6
Variable Ethernet Commands