User`s guide

RFID COMMANDS
220 Copyright © 2006, Cognitive.
!RFID SSONCMD
Function This command controls the automatic execution of
a Select-Tag command prior to the Host Command
to RT, WT, or WTLOCK an RFID tag.
Explicit Form
!RFID SSONCMD ON/OFF
Parameters
ON
Causes automatic Select-Tag command
executions before any RT, WT or WTLOCK
command.
OFF
Select-Tag command occurs on the first
RT, WT, or WTLOCK command of a label
format and does not reoccur prior to the
END command.
Response No specific response
Command Type RFID Setup/Debug Command
Example To Printer:
!RFID SSONCMD OFF
!RFID ?
From Printer:
Setup/Config Parameters:
Assigned Tag Type: ISO15693
| | |
LED Flash Duration: 250 MSecs
SelecTag before Cmd: ON
TxPowerRF after Cmd: ON
NOTE: All CPL-RFID Configuration-Setup Commands
are processed outside the context of a standard CPL
Label-Format, that is, CPL beginning with a header-line
‘! 0 100 nnn 1’ and ending with ‘END’. Attempts to use
CPL-RFID Configuration-Setup Commands within a
Label-Format result are ignored without indication.