User`s guide

PRINTER SETUP

VARIABLE NO_MEDIA

Function Specifies how long the printer will run without

detecting a label before assuming that it is out of

media. This only applies to gap indexing mode

Explicit Form

Implicit Form

VARIABLE NO_MEDIA nn

V NO_MEDIA nn

Parameters

Number of label inches that the printer

will try to feed before assuming it is out

of media. Allowable values are 0 to 12,

with a default of 1.

A value of 0 disables this feature.

Comments When using this command, send it to the printer

with VARIABLE WRITE in a non-printing label

format. Do not use this command in stored label

formats.

This feature works by measuring label gap length.

If the printer detects a gap that is longer than nn, it

assumes that there are no more labels and stops

feeding. You will need to change this setting if your

label media has gaps greater than 1".

The printer always assumes it is empty if it does not

detect a label after feeding 12" of media, regardless

of the VARIABLE NO_MEDIA setting. (In black bar

mode, the printer always stops running after

feeding 12" of media without detecting an index

mark.)

Example

! 0 0 0 0

VARIABLE NO_MEDIA 3

VARIABLE WRITE

END