Spec Sheet

2
DataMan 150/260 Series Barcode Readers
Reduce installation time and cost of ownership
Modular lighting and optics make it easy to change DataMan
150 and 260 series reader lenses and lighting in the field.
This not only reduces installation time and resources, but
protects the ID reader investment by making it easy to optimize
performance for each application and accommodate future
process changes.
For example, if the surface nish of the part or the background
material warrants a new light wavelength to optimize image
formation, just change the on-board lighting instead of buying
a new barcode reader. Likewise, if the reader must be moved
further away from the code, just change from a standard 6.2 mm
lens to a 16 mm lens. There is also an option to have autofocus
capability by installing a liquid lens for both 6.2 mm and 16 mm
focal lengths.
Compatibility for easy retrots
Easy to use tune and trigger buttons
The Tune and Trigger buttons allow for the setup of the
application all without a PC or HMI. After mounting the
reader, simply press the Tune button. Whether the code is
label based or a DPM code, the tuning algorithm trains the
code and automatically adjusts the optics and lighting to
deliver an image optimized for your application.
Once the reader has been tuned, the trigger button makes
it easy to conrm that the reader has been set up properly.
Audible beep or visual LED feedback makes it easy to know
when the code is correctly read.
Tune and Trigger Buttons
Auto-tune and trigger
buttons make the readers
easy to set up without a PC.
Field exchangeable
lighting and optics readily
adapt to changing factory
conditions and application
requirements.
Field Exchangeable Illumination & Optics
DataMan 150/260 series communications,
eld of view, mounting holes and pin out
are compatible with the DataMan 100/200
series readers.
Perfect for DataMan 100/200 series retrofits
The DataMan 150/260 series readers utilize the same mounting conguration and pin out as
the DataMan 100/200 series ID readers. This provides easy retrots into existing DataMan
100/200 applications without adapter plates, or changes to mounting holes and wiring.
Because DataMan 150/260 and 100/200 models have equal standoff distances and elds
of view, retrots require no changes to the machine layout, hardware or application.