User`s guide

44
45
A
B
B
A
C
C
1/4-20 UNC
M6 x 1.0
∅ = 7.14 (0.281)
20 (0.787)
19 (0.75)
25.4 (1.0)
A
B
C
mm (in)
Mounting Checker
Caution:Donotuseamountingscrewwithanexposedthreaddepthofgreater X
than5mm.Allowingthemountingscrewtobottominthemountingholecan
damageChecker.
Caution:Themaximumtorqueforamountingscrewis1.8nM(16inch-pounds).
X
ExceedingthistorquevaluecandamageChecker.
Mounting Checker at a slight angle can reduce reections from your part’s surfaces, improving
performance. Adjust the mounting angle to provide the clearest image of the part features you are
checking.
The optional Checker mounting bracket lets you easily position and adjust Checker on your line.