Specifications

32
2
3
4
1
Getting Started
Minimum PC System Requirements
Microsoft
®
Windows
®
2000™ SP4, Windows XP™, or Windows Vista™
128 MB RAM
USB 1.1 (2.0 recommended for best performance)
1024 x 768 (96 DPI) or 1280 x 1024 (120 DPI) display
Step 1: Install Checker User Interface Software
Insert CD-ROM
If installer does not start automatically, double-click setup.exe
Follow installer prompts
Step 2: Connect Checker Sensor
Connect Checker to 24 VDC power (see Input/Output Wiring for
connection details)
Connect cable shield to earth ground. (If using I/O Module, connect
ground screw to earth ground.)
Connect USB cable to PC
Step 3: Verify Connections
Checker’s green status LED should blink and the illumination LEDs should be
on.
•
•
•
•
1.
2.
3.
1.
2.
3.
Getting Started
Step 4: Verify Operation
Start the Checker User Interface software (select
Cognex->Checker 200 Series->Checker from the Windows Start
menu), then perform the steps listed below to verify that Checker is
functioning properly.
1 Click on Get Connected.
2 Select your Checker in the Checkers list.
3 Click Connect.
4 Verify that Checker is displaying an image.