Specifications

1
2
3
4
5 6
7 8
9
10
11
12
1 Filmstrip mode selector
2 Record button. Click (or press F5) to add an image to the Filmstrip.
3 Recording rate. How many images per second are added to the Filmstrip.
4 Filmstrip display. Click on an image to view it. Orange bars separate images
of a single detected part (in Internal Part Trigger mode).
5 Playback button (only enabled in Playback mode). Press to start or stop
image playback.
6 Filmstrip navigation buttons. Click the inner buttons to advance or rewind by
a single frame. Click the outer buttons to advance or rewind by a single part.
7 Filmstrip clear, load, and save controls.
8 Information button. Hover the cursor here to view information about the
selected Filmstrip image.
Filmstrip Control
9 Video mode. Pressing trigger button starts or stops continuous image capture
to Filmstrip.
10 Snapshot mode. Pressing trigger button adds one image to Filmstrip.
11 External Trigger mode. When an external trigger is received, an image is added.
12 Playback mode.
The Filmstrip Control lets you record and play back Checker images.
Filmstrip Mode Selector
The Filmstrip mode selector controls whether the Filmstrip is recording or
playing back images, and if it is recording, when images are recorded to
the Filmstrip.