. The device should be kept distance from barrier. Install first before turn on the device, in order to prevent the blade from scratching others and damaging the device blades. Keep distance when the device is working. Keep safety when Install It high above the ground. When the device is working, do not disassemble the device, or plug Inf out TF card, otherwise It may cause abnormal operation on the device. . Keep away from high temperature and high humidity environment.
eo Indicator light: Indicates status and operation of power, mode, and match a Indicator light: Indicates Cloud connection, WI-Fi status and other operations.
start Device €) OFF : Stop Device & P -: Switch to the previous program, If go to the first program, then switch to the last program P +: Switch to the next program the last program then switch to the first program. ©} P1: Switch to the first program. oO MATCH : Match remits controller.
1 Install fixed part First fix the fixed part ta the wall with expansion screws or ordinary screws to facilitate the subsequent installation of the device. As below picture . Wall-mounted fixtures Installation Diagram 2 Instructions Vicissitude Into fixed part, lock the screws to finish install. As.
1 After installation, connect the power supply Please use the power adapter to connect the device to the power socket after installation, then the device is in the standby state. You can see that the LED on the fan blades illuminate in a looping manner and then turn off. The Indicator light 1on the back of the devices Is dolls red. (If the red light and ths fan LED ars not lit, pleads check the power supply. If the fan LED is on and the red light is off, the device is in slave mode.
5 Switch mode There are two working modes of the device, master mode and slave mode. u Master mode Use te send Instructions when one device works alone or multiple devices work together. Use to receive commands and forward commands when multiples devices are linked to work. The slave mode device cannot display the program separately, and must receive the host's command to display It. The remote controller cannot ba controlled In slave mods.
Link description: The syn out interface of device 1 linked to the syn in interface of device 2, then linked from the syn out Interface to the syn In Interface of device 3 and linked from the syn out interface to the syn in interface of device 4 , finally linked from the syn out interface to the syn in interface of device 1, as shown below replete: Device connect diagram Sslsct any device setting to hast mode , other device setting to slave mods . If there more devices, the link way Is the mass.
6 Editing Play Program The play program on the device can be edited through the mobile phone software APP. Functions that can be edited include program download, play order, number of plays, and program deletion. For more detailed operation, please refer te the software configuration below. 7 Cloud Devices can access cloud servers and manage devices and materials. For how to connect to the cloud, please refer to the cloud online guide.
Download software Go to the official website or Apple Store to seas “3D magic”, find the relevant product software and download It online, or contact the product supplier. 2 Install software After downloading the software, follow the installation instructions to Install It. After Installation, open the following Image.
3 Connect the device After the device power on will set up potshot WIFI, turn on the mobile phone wireless function, and search tha potshot start with Coleus, such as Cosus_X65_ xox. Then Input password CSxuoxx{x0uo0 represents six numbers}. Connect to this potshot. (Hers Is potshot name and password on the devious. Open the soft are after successfully connect to the potshot.
5 Program editing operation A)Add a program: After clicking, pop up the selection box, select the created video or lecturers, modify the name and click OK, Walt for the progress bar to finish running, and ths corresponding fell name appears in the list, in dictating that the addition is success ful. B) Mace up, down: Click "edit", Lang-press program to move up or down GC) Del Click "edit", Select the program and click “Delete” to deletes the program.
3.Input the device number, password, and save. (The device number and password are obtained through the mobile app) 4.0pen the mobile APP and connect the device WIFE, Settings -> Network Settings -> Input the router WIFI account + password -> OK -> Exit APF. 5.The connection Is successful, and the status of the corresponding device in the cloud becomes online. Note: If you have successfully connected to the cloud,subsequent connections require only the first step.
1. After the prows is connected, the LED on the fan blade is not working or the indicator on the back is not working. Solution: Check If the prows supply Is connected and the line Is. normal 2. The light on the back is pies) Solution: Check if it enters the slave made, long press the button on the back to restore the master mode. 3. The light on the back Is places as matrix} Solution: Long press the MODE button to return the master mods Jor long press MATCH bunion to return slave mode. 4.
Video, picture Format mp4, aviator, mkv, wmv, mov.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could cold the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cuss harmful interference, and (2) this device must accept any Interference raveled, Including Interference that may cause undesired operation.
