Instruction manual

English
21
The 24 gel presets bank is organized to allow you to arrange the custom gels in function of the primary color and/or the mixing
method (RGB or CMY). For example, if you are going to store your “blue sky” blue obtained by RGB, it is recommendable to store it
under RGB BLUE in one of the four available positions; if your next storing is a “fire red” obtained by CMY it should be stored in one
of the four available positions under CMY MAG and so on. Once you have customized the bank you can check by scrolling the
COLR menu that the new gels will be named with the numbers of the memory positions (1 to 4).
WARNING ! the operation is irreversible. Once modified, the bank cannot be restored even launching the restore to
default settings function. We recommend to store the factory bank before proceeding by using DR1+ interface ( see
instruction at chapter 8.6.1)
8.3.2 TEST Functions VariWhite
8.3.3 TEST Functions White 3200K
W.TEMP
DIMMER
STROBE
TEST
7000 4000 3200
-Store
0 - 255
0 - 255
TEST
-Store
DIMMER
STROBE
0 - 255
0 - 255
It allows to vary the channel of white on
several color temperatures from 3200 °K
to 9000 °K, without DMX signal.
STORE saves settings for the next
turning on of the projector.