Instruction manual

English
18
8. Display panel functions
By suitably using all the functions of Reflection LEDko, which can be activated through its display panel, it is possible to change
some of the parameters and to add some functions.
Changing the preset settings made by Coemar can vary the functions of the projector so that it will respond differently to the
controller; therefore carefully read about the functions described here before carrying out any possible selection..
8.1 Quick guide to menu
In order to access the functions, just press the menu button: press the key + or – to scroll pages. To select the desired function,
press enter key.
8.2 Rapid count
By the display panel of Reflection LEDko It is possible to quickly change the various numbers displayed for the different functions
in the following 3 manners:
1.Pressing the + or – buttons will cause the count to be quicker.
2.Pressing first + and then – and then holding them down simultaneously will cause the numbers to jump to the highest value.
3.Pressing first – and then + and then holding them down simultaneously will cause the numbers to jump to the lowest value.