Specifications

Reset

This function allows you to send the reset command to your fixtures. Press the Reset

button to access the reset menu, its LED will be lit and a new window will appear in

the Screen.

PUSH FIXTURE'S KEYS TO SEND RESET

esc

Press the Fixtures 1-16 button for several seconds until the fixture starts resetting.

The time you keep pressing for depends on the fixture's performance. Please

remember you should have assigned the reset channel and its values of On/Off

first before you can carry out this function.

Utility Controls

MIDI Implementation

To activate MIDI operation, you must first select a MIDI channel identical to that of the

MIDI keyboard or sequencer.

The Light Desk Pro will send and receive MIDI program changes according to the

following table:

NOTE

0-47(00H-2FH)

48-95(30H-5FH)

96-115(60H-73H)

116-125(74H-7DH)

126(7EH)

127(7FH)

FUNCTION

SHOW 01-48

CHASE 01-48

SCENE 01-20

STROBE PROGRAM 01-10

SMOKE

BLACKOUT

MIDI Implementation

Lamp

This function allows you to switch on or off the fixture lamp. Press the Lamp button

to access the Lamp menu, its LED will be lit and a new window will appear.

SWITCH LAMPS BY HOLDING DOWN KEYS

esc

All the lamps are set to "on" by default when this console is turned on. Press the

Fixtures 1-16 button for five(5) seconds, its LED will go out, accordingly the fixture

lamp will be switched off. To switch on the fixture lamp, you'll have to press the

Fixtures 1-16 button for five(5) seconds again until its LED is lit.

Please remember you should have assigned the lamp channel and its values of

On/Off first before you can carry out this function.