Specifications

Copy
Times
The Times button is used to set a multiplying factor for the playing speed of the
shows, chases or scenes. When the Fixture LED is lit and the message "SELECT
FIXTURE" appears in the Screen, press the TIMES button to access the times
menu, its LED will blink briefly and a new window will appear.
SELECT SHOW
esc
ok
*01* [ 25 ]
SPEED%
Utility Facilities
COPY OBJECT FROM TO
esc
ok
Show [ 1 ] 2
quit
<ESC>
Press ENTER to store
Show 02 will be updated!
44
45
Utility Facilities
This function allows you to multiply the playing speed within 25-400% for the shows,
chases or scenes. As a result, you can greatly enhance or attenuate the playing
speed of the presets.
Press the Show button, the shows being played will appear in the Screen. Press the
Faders 1-4 button or Forward/Backward button to select the show, which is indicated
by the marking "* *" . Move the Fader 5 or press Up/Down button to set the SPEED%
within 25-400%. After all, the ultimate playing speed complies with the limit of 1 minute
and 39.9 seconds(99.9 seconds).
Proceed in this way to continue the setup of speed% for the chases or scenes.
Additionally, the Flash 1-12 buttons can be used together with the Flash page button
to directly call a certain step of the active show or chase with the mark "* *".
Press the TIMES button again to leave this menu, its LED will go out.
When the Fixture LED is lit and the message "SELECT FIXTURE" appears in the
Screen, press the COPY button to access the copy menu, its LED will blink briefly
and a new window will appear.
This function allows you to make a copy between two shows, chases or scenes.
The Show, Chase or Scene button can be used to make a copy of the show,
chase or scene. Press the Show button, move the Fader 3 to select the source
show you wish to have a copy, then move the Fader 4 to select the target show
you wish to place this copy. After your selections, press "ok", a prompt message
will appear telling you the target show will be updated.
Press the ENTER button to save and leave this menu. Press the Fader 6 button
<ESC> to leave this menu without having a copy. Press the "esc"(quit) button to
cancel this copy and have another try.
Every time you finish a copy successfully, it will automatically leave this menu.
Press the COPY button to have a new copy. Repeat the same procedure stated
in the above paragraph for every copy required.