Specifications

Record Record
38
39
3. Record Scenes
Press ENTER to store
Show 01 will be update !
quit
< ESC >
When you have finished editing the show, press the Show or Record button to leave
the edit menu. A prompt message will appear in the Screen. You can also press "esc"
until the same message appears. Please remember to press the Enter button to store
your setting definitively when you leave the edit menu. If you want to leave this menu
without modifying this show, you can press the Fader 6 button below the "ESC".
Press the Esc button to re-enter this menu for another try.
This console allows you t o record up to 48 chases of conventional lights. Press the
Record button to cause its LED to blink briefly, a new window will appear, telling you
to select the show, chase or scene you wish to record.
Select page and chase number
esc
2. Record Chases
Select what you want to record
esc
ok
Press the Chase button to access edit chase menu, its LED will be lit, and a new
window will appear, indicating you to select the chase you wish to edit.
Select the chase number using Flash 1-12 together with the Flash page button,
a new window will appear, meanwhile the message "step 1" will appear in the
centered Segment Display.
[ ]5
CHASE STEP CROSS% TIME
- 1 - 50 2S
esc
ok
This menu allows you to determine how many steps constitute this chase, set the
duration time(i.e. chase rate) and crossfade for the chase, and create or modify
the steps which make up the chase.
Move the Fader 2 to select the value within 1-48 for the amount of step, then move
the Fader 5 to select the duration time(TIME) within 0 second to one minute and
39.9 seconds(1M39.9S), and move the Fader 4 to select the crossfade (CROSS%,
i.e. percentage of the duration time, within 0-100%.
Now we can start editing the step for the chase. The chase has a maximum of 48
steps, and each step consists of up to 24 channels. U
desired lighting setup(scene),
then press the Store button to save the scene as the 1st step of the chase. The
Segment Display shows "step 2", indicating you are ready to edit the 2nd step.
Carry on the 2nd step and the rest steps until all steps are completed.
se the Channel faders 1-12
together with the Channel bank button to create a
You can also directly access and call a step required to be edited. Press and hold
down the Step button, meanwhile press the Flash 1-12 together with the Page
to select the step that will be indicated by the Segment Display. Proceed in the way
stated in the above paragraph to edit and save the step.
Press "ok" to save the attributes - the amount of the steps, standing time,
crossfade, etc. and return to the earlier menu. Press "esc" to leave this menu
without changing these attributes.
Press the Record or Chase button causing Chase LED to go out, you will leave the
record chase menu.
This console allows you t o record up to 48 scenes of conventional lights. Press the
Record button to cause its LED to blink briefly, a new window will appear, telling you
to select the show, chase or scene you wish to record.
Select what you want to record
esc
ok
Press the Scene button to access edit scene menu, its LED will be lit, and a new
window will appear, indicating you to select the scene you wish to edit.
Select page and scene number
esc