Specifications

IMPORTANT! This console complies with LTP (Latest Takes Priority) principle,
as a result, if a fixture is used by more than one show, the latest activated show will
surely become the first consideration.
Record Record
36
37
1.2 Edit Steps
Move the Fader 4 or press UP/DOWN button until the message [EDIT STEPS]
appears in the Screen. Press "ok" to access this setting men, the fixture(s) you
selected for the show will be enabled and its effects will appear in the Screen.
This menu allows you to create or modify the steps which make up the show.
esc
ok
[ ]EDIT STEPS
EDIT MENU
0 120 0 0 0 255
COLOR GOBOS G.ROT PRISM SHUTT DIMMR
0
999
Move the Faders 1-6 and use the joystick to control the adjustment of the enabled
fixture(s). If this adjustment is satisfactory, press and hold down the Store button,
a message "Select destination step" will appear in the Screen.
Select destination step
In the meantime, press Flash 1-12 together with Flash page to select the step
number where you wish to store this step. Proceed in this way for each step required.
You can also directly access and call a step required to be edited. Press and hold
down the Step button, a message "Select step to edit" will appear in the Screen.
Select step to edit
Meanwhile press Flash 1-12 together with page to select the step you
wish to edit. The step will be available immediately. Modify and store the step
in accordance with the editing procedure hereinbefore.
When the procedure is finished, press "esc" button to return to the setting menu.
esc
ok
[ ]STEP'S TIME
EDIT MENU
1.3 Step's Time
Move the Fader 4 or press UP/DOWN button until the message [STEP'S TIME]
appears in the Screen. Press "ok" to access this setting men, a new window will
appear. This menu allows you to set the standing time and crossfade of each
step in a Show.
ok
[ ]2
SHOW STEP CROSS% TIME
- 1 - 50 2S
Move the Fader 2 to select the step number(STEP), then move the Fader 4 to
select the standing time of the step(TIME) within 0 second to one minute and 39.9
seconds(1M39.9S), in the end move the Fader 3 to select the crossfade
(CROSS%), i.e. percentage of the standing time, within 0-100%.
Proceed in this way for each step required.
It's possible to set several steps at a time with the same setup. Press and hold down
the Step button, meanwhile select several steps(indicated by the lit LEDs) using the
Flash 1-12 buttons together with page button. A message will appear in the
Screen.
ok
[ ]GR
SHOW STEP CROSS% TIME
- 1 -
*** ******
Set the values as the way described hereinbefore. Press "ok" to return to the
setting menu.