Specifications

Press the Setup button to access Setup menu. Move the Fader 4 or press the
Up/Down buttons until the message [ SAVE TO CARD ] appears in the Screen.
Please insert your Scandisk 32 MB Compact Flash card first before you can
access this menu. Press "ok", a new window will appear allowing you to select
and name the sector which will be used to format your CF card preliminarily.
together
with
Move Fader 3 to select the sector within 1-15, then use Forward button
Fader 5 to name this sector.
Press "ok" to access setting menu, A new window will appear indicating you to
select the file category you wish to make a backup.
This menu allows you to make a backup of the Library, Memory or Setup using CF
card. Move Fader 4 or press Up/Down button until wanted file category appears in
the Screen.
10. Save to Card
Loading LIBRARY file from PC port
exit
Please wait ......
Load data file to PC port
esc
ok
Select [ ]LIBRARY
LIBRARY RECEIVE COMPLETED!
esc
ok
Press "ok" or "esc" to return to the earlier menu. If there is something wrong , an error
message will appear. appear in the LCD. Check your connections and try again.
9. Update Software
Press the Setup button to access Setup menu. Move the Fader 4 or press the
Up/Down buttons until the message [ UPDATE SOFTWARE ]. appears in the Screen.
CONFIGURATION & SETUP MENU
esc
ok
SELECT [ ]UPDATE SOFTWARE
Press "ok" to access setting menu, a waiting message will appear indicating that
this console is ready to receive the software.
Updating software
exit
Please wait ......
call the version of Hyper Terminal that you created for Light
Desk Pro. Click on "Transfer" on the top menu bar and select "Send Text File". A
dialog box will appear allowing you to select the text file we provide (We will provide
you the higher version software in Text type file). Find the drive and folder where
the file is located, select the file and click on "Open". Hyper Terminal will begin to
transmit the file. It will take you two minutes to complete this software updating.
If the software has been updated successfully, your Light Desk Pro will reboot
its system and get started with its procedures. If there is something wrong, an error
message will appear, please check the connection and try again.
Turn to your PC and
Setup MenuSetup Menu
30
31
downloading the data file, please make sure you've established the communication
between this console and your PC successfully and Windows configuration has been
completed properly.
Please refer to menu 7 on page for instructions of RS-232 connection and Windows
configuration.
Call the version of Hyper Terminal that you previously created for Light Desk Pro.
Click on "Transfer" on the top menu bar and select "Send Text File". A dialog box
will appear allowing you to select the text file. Find the drive and folder, select the
file and click on "Open". Hyper Terminal will begin to transmit the file. When the
downloading is over, a receiving prompt message will appear in the Screen.
CONFIGURATION & SETUP MENU
esc
ok
SELE CT [ ]LOAD DATA FILE