Specifications

CONFIGURATION & SETUP MENU
esc
ok
SELECT [ ]STROBE TYPE
4. Strobe Type
STROBE TYPE
esc
ok
[ SPQ-2 ]
CONFIGURATION & SETUP MENU
esc
ok
SELECT [ ]VIEW FREE MEMORY
6. View Free Memory
FREE MEMORY: FIXTURE LIB: 122
esc
ok
SHOW: 48 CHASE: 48 SCENE: 48
7. Send Data File
Setup MenuSetup Menu
26
27
Press the Setup button to access Setup menu. Move the Fader 4 or press the
Up/Down buttons until the message [ STROBE TYPE ] appears in the Screen.
Press "ok" to access setting menu, a new window will appear. This function
allows you to select the strobe between SPQ-2 and SP-1500/SP-750/SP-200H,
which you can control using this console. Move Fader 4 or press Up/Down button
to select desired strobe type. Press "ok" to confirm your setting or you can press
"esc" to give up and return to the earlier menu.
Attention! You may have to do some extra setup on your strobes to adapt to this
console. As for the SPQ-2, make sure that you switch Dip-switches 1 & 2 on and
the rests off. As for the other strobes, please be sure they are in DMX pack mode.
5. Gooseneck Dimmer
Press the Setup button to access Setup menu. Move the Fader 4 or press the
Up/Down buttons until [ GOOSENECK DIMMER ] appears in the Screen.
Press "ok" to access setting menu, a new window will appear. This function
allows you to adjust the light intensity for the DJ work light(sold separately).
Move Fader 4 or press Up/Down button to select a value within 0-16. "0" will
give zero intensity(fully off), and "16" will give 100% intensity(fully on).
Press "ok" to confirm your setting or you can press "esc" to give up and return
to the earlier menu.
CONFIGURATION & SETUP MENU
esc
ok
SELECT [ ]GOOSENECK DIMMER
GOOSENECK DIMMER
esc
ok
[ 1 ]
Press the Setup button to access Setup menu. Move the Fader 4 or press the
Up/Down buttons until [ VIEW FREE MEMORY ] appears in the Screen.
Press "ok", a new window will appear telling you how many data files there are
and how much memory space is available for the fixture library.
Press "ok" or "esc" to return to the earlier menu.
Press the Setup button to access Setup menu. Move the Fader 4 or press the
Up/Down buttons until [ SEND DATA FILE ] appears in the Screen.
Press "ok" to access setting menu, a new window will appear indicating you to
select desired data file to make a backup in your PC. This function allow you to
make a backup of the Fixture Library, Memory or Setup in your PC via RS-232
port. Before you can start sending the data file, please make sure you've
established the communication between this console and your PC successfully
and window configuration has been completed properly.
Please read the following paragraphs to learn how to set up RS-232 connection
and window configuration.
Help - RS-232 connection and window Configuration
To connect to a PC, you will need a serial lap link cable available at any computer
store. A standard RS-232 cable will not work. Connect the RS-232 port on Light
Desk Pro to one of the Serial " com" ports on your PC.