Specifications

2.4 Smoke Patch
DMX CHANNEL AUTO PATCH- ON
esc
ok
Select [ ]SMOKE PATCH
2.2 Parcan Patch
Move the Fader 5 or press Up/Down buttons until the message [ PAR PATCH ]
appears in the Screen. Press "ok" to access the setting menu, a new window will
appear. This menu allows you to address 24 Par-lights .
When you are in Automatic patch mode, DMX addresses 480-503, i.e. 12 channel
faders 1-12/13-24 will be automatically addressed to the Par-lights.
When you are in Manual patch mode, please calculate the DMX channels carefully
to address properly.
Press "ok" to confirm your
setting, either you can press "esc" to give up and return to the earlier menu.
consecutively
Move the Fader 2 or press Up/Down button to select the starting DMX address,
24 consecutive addresses will be automatically given.
DMX CHANNEL AUTO PATCH- ON
esc
ok
Select [ ]PAR PATCH
PAR DMX CHANNEL
esc
ok
FROM [ 480 ] TO 503
SMOKE DMX CHANNEL
esc
ok
FROM [ 512 ] TO 512
Setup MenuSetup Menu
24
25
2.3 Strobe Patch
Move the Fader 5 or press Up/Down buttons until the message [ STROBE PATCH ]
appears in the Screen. Press "ok" to access the setting menu, a new window will
appear. This menu allows you to address 4 Strobes with two(2) channels each.
When you are in Automatic patch mode, DMX addresses 504-511 will be automatically
addressed to the Strobes. When you are in Manual patch mode, please calculate the
DMX channels carefully to address properly.
Move the Fader 2 or press Up/Down button to select the starting DMX address, 4
strobes will be automatically addressed. Press "ok" to confirm your setting, either you
can press "esc" to give up and return to the earlier menu.
DMX CHANNEL AUTO PATCH- ON
esc
ok
Select [ ]STROBE PATCH
STROBE DMX CHANNEL
esc
ok
FROM [ 504 ] TO 511
Move the Fader 5 or press Up/Down buttons until the message [ SMOKE PATCH ]
appears in the Screen. Press "ok" to access the setting menu, a new window will
appear. This menu allows you to address the Fog Machine, i.e. Smoke..
When you are in Automatic patch mode, DMX address 512 will be automatically
addressed to the Smoke. When you are in Manual patch mode, please calculate the
DMX channels carefully to address properly.
Move the Fader 2 or press Up/Down button to select the proper DMX address for
the Smoke. Press "ok" to confirm your setting, either you can press "esc" to give up
and return to the earlier menu.
3. MIDI Channel
Press the Setup button to access Setup menu. Move the Fader 4 or press the
Up/Down buttons until the message [ MIDI CHANNEL ] appears in the Screen.
Press "ok" to access setting menu, a new window will appear indicating you to
select the MIDI channel in accordance with that of MIDI device or sequencer.
This function allows you to use a MIDI device or sequencer to operate this
console. Move Fader 4 or press Up/Down button to select a value within 1-16.
Press "ok" to confirm your setting or you can press "esc" to give up and return
to the earlier menu.
CONFIGURATION & SETUP MENU
esc
ok
SELECT [ ]MIDI CHANNEL
MIDI CHANNEL
esc
ok
[ 16 ]