Specifications

Press "ok", a new window will appear indicating you to select "ON" or "OFF" for
"DMX CHANNEL AUTO PATCH". This menu allows you to select automatic
or manual patch. Move Fader 5 or press Up/Down button to select "ON" or "OFF",
namely automatic or manual patch.
When "ON" is selected(Automatic patch is active), up to 16
1-479, DMX addresses 480-503(12 channel faders:
1-12/13-24) will be addressed to the Par-lights , and DMX addresses
504-511 will be automatically allocated to 4 strobes, consequently, DMX address
512 will be left for the Fog machine. When "OFF" is selected(Manual patch is active,
you can allocate DMX addresses at your discretion.
Had you changed the patch mode, press "ok", a new window will appear asking
for your conformation. If you are sure, press "ok"(yes) to confirm your selection and
access the settingl menu. Press "esc"(quit) to cancel it and retry. "no" will abort this
setting and return to the earlier menu.
patched fixtures will be
automatically addressed within
consecutively
2. Patch
2.1 Fixture Patch
CONFIGURATION & SETUP MENU
esc
ok
SELECT [ ]PATCH
DMX CHANNEL AUTO PATCH
esc
ok
SELECT [ ]ON
Fix.
1
TYPE FROM 1 - - cod - - 10
[ Ypoc 250 ]
DEL
TO
1
14
Setup MenuSetup Menu
22
23
Press the Setup button to access Setup menu. Move the Fader 4 or press the
Up/Down buttons until the message [ PATCH ] appears in the Screen.
D M X C H A N N E L A U T O PAT C H - O N
quit
yes
D o y o u w a n t t o c h a n g e i t ?
no
Press "ok" to access the settingl menu, a new window will appear indicating
you to select the unit type you wish to patch. Whether you are in Automatic or Manual
patch mode, there are four(4) unit types, namely the Fixture, Parcan, Strobe and
Fog Machine.
Move Fader 5 or press Up/Down button until desired unit appears in the Screen.
Please read the following paragraphs to learn more.
Move the Fader 5 or press Up/Down buttons until the message [ FIXTURE
PATCH ] appears in the Screen.
Press "ok" to access the setting menu, a new window will appear. This menu allows
you to establish a patch of up to 16 fixtures. Move the Fader 1 to select fixture
number within 1-16, then move the Fader 2 to select your desired fixture from the
library for the selected number. Repeat this step until you've completed this patch.
Also you can use Forward/Backward button to pass from fixture number to type,
then press Up/Down button to select the number or type.
When you are in Automatic patch mode, all patched fixtures will be automatically
addressed within 1-479, thus you may save a great deal of pain. When you are in
Manual patch mode, please calculate the DMX channels carefully so that you can
establish a proper patch.
To remove a fixture from this patch, you just need to press the function button
directly below the Fader 5.
When you have finished this patch, you can press "ok" or "esc" to return to the
earlier menu. The storage is automatic.
Fix.
[ 1 ]
DMX CHANNEL AUTO PATCH- ON
esc
ok
Select [ ]FIXTURE PATCH
TYPE FROM 1 - - cod - - 10
DEL
TO
DMX CHANNEL AUTO PATCH- ON
esc
ok
Select [ ]FIXTURE PATCH