Specifications

Setup MenuSetup Menu
Press "ok" to go on with your setup with control type if there is more than one page.
Had you finished your settings, press "esc" to return to the earlier menu. The storage
is automatic.
1.1.10 Dimmer Patch
Select feature to configure for
esc
ok
FIXTURE NAME - [ ]DIMMER PATCH
Enter dimmer channel
esc
ok
FIXTURE NAME - [ 10 ]
When the LCD Screen shows the message "Create New Fixture", press "ok", then
move the Fader 5 or press UP/DOWN buttons until [ DIMMER PATCH ] appears
in the Screen.
Press "ok", a warning message will appear in the Screen telling you that the Dimmer
channel should not be identical to that of Pan, Tilt, Reset or Lamp. Press "ok" again,
a new window will appear indicating you to assign the Dimmer channel.
Move the Fader 5 to select a value for the dimmer channel according your fixture profile.
Had you finished your settings, press "ok" to confirm it and return to the earlier menu.
If you want to give up, just press "esc" to return to the earlier menu.
INTERNAL LIBRARY CONFIGURATION
Select ITEM
[ ]CREATE NEW FIXTURE
Select feature to configure for
esc
ok
FIXTURE NAME - [ ]DIMMER PATCH
1.2 Edit Existing Fixture
INTERNAL LIBRARY CONFIGURATION
Select ITEM
[ ]EDIT EXISTING FIXTURE
Select fixture to config. in libr.
esc
ok
[ ]Ypoc 250
CONFIGURATION & SETUP MENU
esc
ok
SELECT [ ]INTERNAL LIBRARY
Press the Setup button to access Setup menu. Move the Fader 4 or press the
Up/Down buttons until the message[ Internal Library ] appears in the Screen.
Press "ok", a new window will appear. Move Fader 5 or press Up/Down button until
the message [ EDIT EXISTING FIXTURE ] appears in the Screen.
Press "ok", a new window will appear indicating you to select the fixture you wish to
edit.
Move the Fader 4 or Up/Down button to select desired fixture from the library.
Once the fixture is selected, press "ok", a new window will appear indicating that
you can start to modify the attributes of this fixture.
Please refer to menu 1.1 and its submenus for instructions of configuration of fixture.
This menu allows you to modify the attributes of fixtures already in the library.
Select feature to configure for
esc
ok
FIXTURE NAME - [ ]DIMMER PATCH
18
19