Specifications

ManualsBrandsCoemar ManualsHome building and DecorCF 1200 Hard Edge

Setup MenuSetup Menu

1.1.9 Control Type

COLOR GOBOS G. ROT PRISM SHUTT

[ TAB ] LIN LIN LIN LIN

When the LCD Screen shows the message "Create New Fixture", press "ok", then

move the Fader 5 or press UP/DOWN buttons until [ CONTROL TYPE] appears

in the Screen.

Press "ok", the effect strings previously created in menu 1.1.2 LCD Effect Label will

reappear. This function allows you to select the control type for lighting effects. It's

well known many fixtures have continuous color and gobo wheel rotation, which

enables operators to obtain interesting projection effects. However, it is more important

to be able to directly jump to a certain color or effect during programming.

The types of control available are Linear(LIN) and Tabset(TAB): the first allows you to

use programmed fader to adjust the fixture channel proportionally, the second allows

you to use Up/Down button to abruptly change the condition in accordance with the

pre-set tabset.

Move the repective faders 1-6 to select "LIN" or "TAB" for the function effects in the

Screen directly above these faders 1-6. Also you can press Forward or Backward to

pass from effect to effect, then use Up/Down button to select "LIN" or "TAB" for the

effect.

As described in the above paragraph, "TAB" allows you to use Up/Down button

to jump to certain condition in accordance with the pre-set tabset. To establish a

tabset, please follow the below procedures:

a. Press the function button directly below the function effect in the LCD Screen,

a new window will appear:

INTERNAL LIBRARY CONFIGURATION

Select ITEM

[ ]CREATE NEW FIXTURE

Select feature to configure for

esc

FIXTURE NAME - [ ]CONTROL TYPE

COLOR GOBOS G. ROT PRISM SHUTT DIMMR

[ LIN ] LIN LIN LIN LIN LIN

PAGE_1

esc

TOT.Pset Pset VALUE

EFFECT_1 [ 1 ] 1 0

Where "TOT.Pset" is the amount of tabulation values, "Pset" is the ordinal number

of tabulation values and "VALUE" is the assignation.

b. Move the Fader 3 to determine how many tabulation values you wish to use.

This value ranges from 1-50. Once the amount of tabulation values is decided,

move the Fader 5 to select the number for "Pset" and the Fader 6 to select the

value within 0-255 for "VALUE".

PAGE_1

esc

TOT.Pset Pset VALUE

EFFECT_1 [ 5 ] 1 0

PAGE_1

esc

TOT.Pset

Pset

VALUE

EFFECT_1

[ 5 ]

101

250

c. Repeat moving Fader 5 and Fader 6 until all tabulation values have been

assigned. Had you finished the whole tabulation, press "ok" to confirm it and

return to the earlier menu. If you want to give up, just press "esc" to return to

the earlier menu.

COLOR GOBOS G. ROT PRISM SHUTT

[ TAB ] LIN LIN LIN LIN