Specifications
Setup MenuSetup Menu
12
13
Select feature to configure for
esc
ok
FIXTURE NAME - [ ]HARD/SOFT CROSS
1.1.5 Hard/ Soft Cross
When the LCD Screen shows the message "Create New Fixture", press "ok", then
move the Fader 5 or press UP/DOWN buttons until [ HARD/SOFT CROSS]
appears in the Screen.
Press "ok", the effect strings previously created in menu 1.1.2 LCD Effect Label will
reappear. This function allows you to determine how a fixture channel will obtain its
desired setting. This may be "Hard", i.e. Taking place with no-fadetime, or "Soft", i.e.
Taking place with fadetime. Respectively move faders 1-6 to select "Hard" or "Soft"
for the function effects in the Screen directly above these faders 1-6. Also you can
press Forward or Backward to pass from effect to effect, then use Up/Down button
to select "Hard" or "Soft" for the underlined effect.
Press "ok" to go on if there is more than one page. Had you finished all settings,
press "esc" to return to the earlier menu. The storage is automatic.
P1
COLOR GOBOS G. ROT PRISM SHUTT DIMMR
[HARD] HARD HARD HARD HARD HARD
INTERNAL LIBRARY CONFIGURATION
Select ITEM
[ ]CREATE NEW FIXTURE
P2
FOCUS SPEC
[ -- ] -- -- -- -- --
----- ----- ----- -----
1.1.6 Fixture Name
Select feature to configure for
esc
ok
FIXTURE NAME - [ ]FIXTURE NAME
Enter/ modify the name of the fix.:
esc
ok
FIXTURE NAME
When the LCD Screen shows the message "Create New Fixture", press "ok", then
move the Fader 5 or press UP/DOWN buttons until [ FIXTURE NAME] appears
in the Screen.
Press "ok", a new window will appear indicating you to enter or modify the name
for the fixture. Press Forward or Backward button to move the underline to desired
position, then move Fader 4 or press Up/Down button to select the character for
the underlined position.
Had you finished your change of the fixture name, press "ok" to confirm it and return
to the earlier menu. If you want to give up, just press "esc" to return to the earlier
menu.
INTERNAL LIBRARY CONFIGURATION
Select ITEM
[ ]CREATE NEW FIXTURE
Select feature to configure for
esc
ok
Ypoc 250 - [ ]FIXTURE NAME