Specifications

ManualsBrandsCoemar ManualsHome building and DecorCF 1200 Hard Edge

Setup MenuSetup Menu

When the LCD Screen shows the message "Create New Fixture", press "ok", then

move the Fader 5 or press UP/DOWN buttons until [ TOTAL DMX CHANNEL]

appears in the Screen.

Press "ok", a new window will appear telling you to determine how many channels

your new fixture will use. Move the Fader 5 or cursor Up/Down button to select a value

within 1-36, then press "ok" to confirm your setting and return to the earlier menu.

Total channels occupied on dmx

esc

FIXTURE NAME - [ ]1

1.1.1 Total DMX Channel

Select feature to configure for

esc

FIXTURE NAME - [ ]TOTAL DMX CHANNEL

Press "ok", a new window will appear indicating you that can start to establish the

configuration for the newly-added fixture. This menu allows you to add a fixture

and its attributes into the fixture library(The library can hold a maximum of 255

types of fixtures). There are ten(10) options in Create New Fixture, namely

Total DMX Channel, LCD Effect Label, Internal Patch, Pan/ Tilt Patch,

Hard/ Soft Cross, Fixture Name, Reset/ Lamp Values, Dip-Switch Configuration,

Control Type and Dimmer Patch.

INTERNAL LIBRARY CONFIGURATION

Select ITEM

[ ]CREATE NEW FIXTURE

Select feature to configure for

esc

FIXTURE NAME - [ ]TOTAL DMX CHANNEL

When the LCD Screen shows the message "Create New Fixture", press "ok", then

move the Fader 5 or press UP/DOWN buttons until [ LCD EFFECT LABEL]

appears in the Screen.

1.1.2 LCD Effect Label

Select feature to configure for

esc

FIXTURE NAME - [ ]LCD EFFECT LABEL

Enter number of lcd pages

esc

FIXTURE NAME - [ 2 ]

INTERNAL LIBRARY CONFIGURATION

Select ITEM

[ ]CREATE NEW FIXTURE

Press "ok", a new window will appear telling you to enter a value within 1-5 for the

amount of pages required to view all lighting effects on the Screen. Move the

Fader 5r or cursor Up/Down button to select a value within 1-5, then press "ok" to

confirm or "esc" to exit.

Press "ok", a new window will appear prompting you to enter a string of effects - a

definition list of the commands required by the fixture to be written on the Screen,

for each page. Each page contains 6 strings of effect, and each string consists of

a maximum of 6 characters. Press Cursor Up/Down to call in string effects from

built-in. If you need some special effects, you'll have to make a new one yourself.

Fader 1 to enter the character

Press Forward or Backward button to pass from letter to letter, then move

one by one. This console has a embedded

dictionary, you can move the Fader 1 to scroll through all characters available.

Enter the string for effects