Instruction manual

3) Locate the lampholder (C)
4) The GX 9,5 lampholder is symmetrical in construction; the lamp used is manufac-
tured from quartz glass and should be handled with care; always adhere to the
instructions supplied in the lamp’s packaging. Never touch the glass directly, use
the tissue provided in the lamp’s packaging.
Insert the lamp (D) into the lampholder (C). DO NOT USE UNDUE FORCE. In case
of difficulty, re-read the instructions and repeat the procedure.
5) Replace the lamp assembly (B) into its original position and replace and tighten
the two screws (A) which were previously removed.
Attention: we recommend that the lamp be realigned in the optical train of the unit
to avoid overheating of the dichroic filters and other internal components of the
unit. refer to section 13 for instructions about this procedure.