Instruction manual

2) Press the enter button to confirm your selection; the display will show a numeri-

cal value which corresponds to the factory preset.

3) Press the + or – button until the numerical value corresponds with the correct ali-

gnment of the unit (note that with each press of the + or – button the motor will

move).

4) Press the enter button to confirm your selection.

SHAL

1) Press the + or – button until the display shows SHAL (for alignment of the black-

out shutter ).

2) Press the enter button to confirm your selection; the display will show a numeri-

cal value which corresponds to the factory preset.

3) Press the + or – button until the numerical value corresponds with the correct ali-

gnment of the black-out shutter in the optical path of the projector.

4) Press the enter button to confirm your selection.

cYAn

1) Press the + or – button until the display shows cYAn (for alignment of the cyan

colour).

2) Press the enter button to confirm your selection; the display will show a numeri-

cal value which corresponds to the factory preset.

3) Press the + or – button until the numerical value corresponds to the perfect align-

ment of the cyan colour in the optical path of the projector.

4) Press the enter button to confirm your selection.

MAG

1) Press the + or – button until the display shows MAG (for alignment of the

magenta colour).

2) Press the enter button to confirm your selection; the display will show a numeri-

cal value which corresponds to the factory preset.

3) Press the + or – button until the numerical value corresponds to the perfect align-

ment of the magenta colour in the optical path of the projector.

4) Press the enter button to confirm your selection.

YELL

1) Press the + or – button until the display shows YELL (for alignment of the yellow

colour).

function display