Instruction manual

14Moving the reset In the packaging for this unit coemar has supplied an optional end stop (8752.71)
home position by 90° which allows the reset/home position to be moved by 90°.
To replace the end stop, complete the following procedure:
1) Using a Ø 17 spanner, loosen the two bolts (A) and (B) which affix the end stop (D).
2) Without moving the yoke of the CF ZOOM AL remove the existing end stop (D).
3) Replace with the optional end stop as shown below and refasten the bolts (A).
-
9
0
°
-90°
A
B
C
B
A C
D D