Instruction manual

3) Press the enter button to confirm your selection; the display will show t 01 (for
test number 1). Press the + or – buttons for subsequent tests from t 01 to t 12.
In these tests the projector simulates the reception of a DMX 512 signal which is
increasing from 1 to 255 on the selected channel.
t 01= movement in the X-axis
t 02= fine movement in the X-axis
t 03= movement in the Y-axis
t 04= fine movement in the Y-axis
t 05= no function
t 06= opening/closing of the blackout/strobe shutter
t 07= zoom
t 08= rotating the effects wheel including diffusor
t 09= rotating the colour wheel
t 10= cyan
t 11= magenta
t 12= yellow
t 13= no function
4) Press the enter button to confirm your selection of test to be carried out.
function display