Instruction manual

9. Powering up After having followed the preceding steps, turn on the DMX 512 controller which
will be used to control the CF ZOOM AL. Following this, turn on the power to the
projector, and turn on the projector’s power switch.The projector will perform
a reset function on all the internal and external motors. This will last
some few seconds, after which it will be subject to the external signal
from the controller.
DMX led
The DMX led will be static on to indicate that DMX 512 signal is being correctly
received by the projector.
If the led is off, the projector is not receiving signal. check the cabling and the func-
tioning of the controller.
function display
DMX
menu enter
+
240V
main setting
coemar: user:
115V
200V
208V
230V
240V
T 2A @ 230V
T 4A @ 115V
power
T 5A @ 230V
T 10A @ 115V