Instruction manual

8. Signal connection
Control signal is digital, and is transmitted via two pair screened ø0.5mm cable.
Connection is serial, utilising XLR 3 or XLR5 male and female sockets located on the
base of the CF ZOOM AL, labeled DMX 512 and DMX 512 standard (see dia-
gram).
Pin connections conform to the international standard:
pin 1= screening 0 volt pin 4= not connected
pin 2= data - pin 5= not connected
pin 3= data +
A connection using the 5 Pin XLR 5
Ad altri
CF ZOOM AL
Connect to other
CF ZOOM AL
3
2
1
Controller
Standard
DMX 512
OUT
in
out
in
out