Instruction manual

6. Mounting the unit

mounting

The CF ZOOM AL may be either floor or ceiling mounted.

The structure from which the unit is hung should be of sufficient rating to hold the

weight of the unit, as should any clamps used to hang the unit.

The structure should also be sufficiently rigid so as not to move or shake whilst the

CF ZOOM AL moves during its operation.

The mounting holes in the base of the unit allow it to be mounted at various angles

to the mounting truss and to trusses of various dimensions.

The following is a diagram outlining the base of the CF ZOOM AL.

Note that in order to take advantage of the full articulated movement of the projec-

tor, it should be installed with the label marked ” Lato frontale/ Front” facing towards

the main item to be illuminated; in this manner the “0” or “home” position of the CF

ZOOM AL will be in the most efficient position.

165mm

455mm

n° 6 asole 72x12 mm r= 6 mm