Instruction manual

YLAL

1) Press the + or - button until the display shows YLAL (for alignment of the yellow

colour).

2) Press the enter button to confirm your selection; the display will show a numeri-

cal value which corresponds to the factory preset.

3) Press the + or - button until the numerical value corresponds to the perfect align-

ment of the yellow colour in the optical path of the projector.

4) Press the enter button to confirm your selection.

diMM

1) Press the + or - button until the display shows diMM (for alignment of the dim-

mer).

2) Press the enter button to confirm your selection; the display will show a numeri-

cal value which corresponds to the factory preset.

3) Press the + or - button until the numerical value corresponds to the full closure of

all the dimmers of the CF 1200 Hard Edge’s in your installation.

4) Press the enter button to confirm your selection.

G1AL

1) Press the + or - button until the display shows G1AL (for alignment of the rota-

ting gobo wheel).

2) Press the enter button to confirm your selection; the display will show a numeri-

cal value which corresponds to the factory preset.

3) Press the + or - button until the numerical value corresponds with the correct ali-

gnment of the rotating gobo wheel in the optical path of the projector.

4) Press the enter button to confirm your selection.

G2AL

1) Press the + or - button until the display shows G2AL (for alignment of the fixed

gobo wheel).

2) Press the enter button to confirm your selection; the display will show a numeri-

cal value which corresponds to the factory preset.

3) Press the + or - button until the numerical value corresponds with the correct ali-

gnment of the static gobo wheel in the optical path of the projector.

4) Press the enter button to confirm your selection.

function display