Instruction manual

channel
function
type of control
effect decimal
13
gobo 2 selection
special (SPEc)
step no gobo (clear) 0-10
proportional
proportional gobo wheel rotation 360° from no gobo to the last
gobo
11-151
proportional gobo wheel rotate continously, speed from min to max 152-255
14
effects selection
(prism, lens)
step no effects (clear) 0-62
effect 1 63-126
effect 2 127-190
effect 3 191-255
15 effects rotation step no effect 0-26
proportional
continuos effect rotation clockwise with proportional speed from min.
to max.
27-255
16
color selection
standard (Strd)
step White 0-23
step color 1 24-49
step color 2 50-73
step color 3 74-99
step color 4 100-123
step color 5 124-151
proportional color wheel rotate continously, speed from min to max 152-255
NOTE: channel 16 function can be varied selecting color standard/special function on the back function display
16
color selection
special (SPEc)
step
no effect 0-10
proportional
proportional color wheel rotation 360° from white to the last color 11-151
proportional color wheel rotate continously, speed from min to max 152-255
17 cyan proportional
proportional cyan control from white to cyan 0-255
18 magenta proportional
proportional magenta control from white to magenta 0-255
19 Yellow proportional
proportional yellow control from white to yellow 0-255
20 function step lamp off 0-19
step pan/tilt go to sensor 20-100
step all motor reset 101-170
step soft focus 171-240
step lamp on 241-255
Back panel can modify function channel (inhibit lamp off)
20 function step lamp on 0-19
step pan/tilt go to sensor 20-100
step all motor reset 101-170
step soft focus 171-240
step lamp on 241-255
note 1: 2 or 4 numbers close to the end limit levels cannot be used as unstable levels
note 2: function channel has a delay time of 6 second to prevent accidental activation.
note 3 :on/off lamp mode is not affected unless an opposite value is received