Instruction manual

12. DMX 512 signal If all procedures have been correctly carried out to this point, the 20 channels of
functions your DMX 512 controller will have full control over all the effects available from your
CF 1200 Hard Edge as described in the following table:
channel
function
type of control
effect decimal
1 Base (pan) coarse proportional coarse control of the base movement 0-255
2 Base (pan) fine proportional fine control of the base movement 0-255
3 Yoke (tilt) coarse proportional coarse control of the Yoke movement 0-255
4 Yoke (tilt) fine proportional fine control of the Yoke movement 0-255
5 dimmer step closed 0-7
proportional from close to open 8-255
6 shutter step closed 0-9
proportional strobe effect increasing flash rate 10-127
proportional random strobe, increasing flash rate 128-247
step open 248-255
7 iris step open 0-15
proportional from large to small 16-115
step iris small 116-192
proportional iris pulse, with increasing pulse speed 193-251
step iris max, wide beam 252-255
8 Zoom proportional proportional zoom control from small to large beam 0-255
9 focus proportional proportional focus control 0-255
10
gobo 1 selection
standard (Strd)
step no gobo 0-30
step gobo 1 31-61
step gobo 2 62-91
step gobo 3 92-123
step gobo 4 124-151
proportional gobo wheel rotate continously, speed from min to max 152-255
NOTE: channel 10 function can be varied selecting gobo standard/special function on the back function display
10
gobo 1 selection
special (SPEc)
step no gobo 0-10
proportional
proportional gobo wheel rotation 360° from no gobo to the last
gobo
11-151
proportional gobo wheel rotate continously, speed from min to max 152-255
11
gobo 1 360°
positioning
step no effect 0-10
proportional proportional indexable gobo positioning 360° 11-255
12
gobo 1 rotation &
fine positioning
proportional proportional indexable fine gobo positioning 360° 0-100
proportional
continuos gobo rotation clockwise with proportional speed from max
to min.
101-176
step
gobo stop
177- 179
proportional
continuos gobo rotation counter-clockwise with proportional speed
from min. to max
180-255
13
gobo 2 selection
standard (Strd)
step no gobo (clear) 0-23
step gobo 1 24-49
step gobo 2 50-73
step gobo 3 74-99
step gobo 4 100-123
step gobo 5 124-151
proportional gobo wheel rotate continously, speed from min to max 152-255
NOTE: channel 13 function can be varied selecting gobo standard/special function on the back function display