Instruction manual

5) Press the enter button after either step 3 or step 4 to confirm your choice of colour

selection.

disp

This function inverts the LED display in the display panel, thereby allowing it to be

read easily regardless of the position in which the projector is mounted (see section

6. Mounting the unit).

1) Press the menu button.

2) Press the + or - button until the display shows diSP (for display).

3) Press the enter button to confirm your selection; the display shows AA (for han-

ging position).

4) Press the + or - button; the display shows (for sitting position).

5) Press the enter button after either step 3 or step 4 to confirm your selection.

LEd

This function allows the display to be switched on or off.

1) Press the menu button.

2) Press the + or - button until the display shows Led.

function display

channel

function

type of control

effect decimal

color selection

standard (Strd)

step White 0-23

step color 1 24-49

step color 2 50-73

step color 3 74-99

step color 4 100-123

step color 5 124-151

proportional color wheel rotate continously, speed from min to max 152-255

NOTE: channel 16 function can be varied selecting color standard/special function on the back function display

color selection

special (SPEc)

step

no effect 0-10

proportional

proportional color wheel rotation 360° from white to the last color 11-151

proportional color wheel rotate continously, speed from min to max 152-255